Where Is the DCM in a 2020 Toyota Tacoma?

The DCM — the Data Communication Module, part of Safety Connect / Connected Services — is the module our bypass harness plugs into. Finding it is the only tricky part of the install. Pick your vehicle and we will show you where it lives and what has to come apart to reach it.

Not sure whether your vehicle even has one? Look for an SOS or Call Toyota button near the rear-view mirror or in the overhead console. No button means no DCM — and no need for the bypass harness.

Short answer

Passenger side, behind the glovebox at the far outer end of the dash.

Moderate - the ECM sits in front of the DCM and comes out first, then the module unbolts with its brackets. More awkward than hard: everythi

DCM (Telematics Module) LocationAutoHarnessHouse.com2020-2023 Toyota TacomaBEDDASHGLOVEBOXCONSOLEshifterDRIVERPASS.FRONT OF VEHICLEVIEW A — looking down1DCMVIEW B — dash from the seatWHERE IT ISBehind the glovebox on the passenger side,but right over at the far outer end of thedash against the outside of the truck - notin the centre stack. It is sandwiched inamong several other modules in that area,so look for the one with the matchingconnectors. It stands vertically behind theglovebox, so you are looking at the narrowedge of the module with the connectors downits side.HOW TO GET TO ITThe factory procedure removes the ECM (theengine computer, mounted just in front ofthe DCM in the same outer-dash area) first,then the DCM with its bracket and the twotelephone brackets. Expect to work by feel- it is a tight cavity shared with severalother modules.DIFFICULTYModerate - the ECM sits in front of the DCMand comes out first, then the moduleunbolts with its brackets. More awkwardthan hard: everythiNo SOS button near the rear-view mirror or overhead console means the vehicle was built withoutSafety Connect - there is no DCM to bypass and this kit is not needed.Schematic drawing, not to scale. Original illustration © AutoHarnessHouse.comautoharnesshouse.com/dcm-location.php?y=2020&m=Toyota%20Tacomaautoharnesshouse.com

What it looks like in the car

Photos from vehicles we and our customers have actually had apart.

DCM location photo - Toyota Tacoma
Marked up: the module mounted vertically behind the glovebox. The silver unit below it is the knee airbag.

Where it is

Behind the glovebox on the passenger side, but right over at the far outer end of the dash against the outside of the truck - not in the centre stack. It is sandwiched in among several other modules in that area, so look for the one with the matching connectors.

How it sits: It stands vertically behind the glovebox, so you are looking at the narrow edge of the module with the connectors down its side.

How to get to it

The factory procedure removes the ECM (the engine computer, mounted just in front of the DCM in the same outer-dash area) first, then the DCM with its bracket and the two telephone brackets. Expect to work by feel - it is a tight cavity shared with several other modules.

No SOS button near the rear-view mirror or overhead console means the vehicle was built without Safety Connect - there is no DCM to bypass and this kit is not needed.

The bypass harness for this vehicle

Our bypass kit disconnects the DCM without losing your front right speaker or the hands-free Bluetooth microphone — the two things that stop working if you simply unplug the module.

See the AHH-DCM77 DCM bypass harness »

Still cannot find it, or your trim looks different? Email us with your year, model, and a photo of your dash and we will point you straight at it.


Vehicles we have mapped so far

We are adding vehicles as we confirm them. Do not see yours? Ask us — that is how this list grows.


Looking for the harness itself? AHH-DCM77 (2020 and newer)AHH-DCM92 (2016-2020).


www.autoharnesshouse.com
inquiry@autoharnesshouse.com

Privacy Policy - Contact Us - Return Policy