Where Is the DCM in a 2021 Toyota Sienna?

The DCM — the Data Communication Module, part of Safety Connect / Connected Services — is the module our bypass harness plugs into. Finding it is the only tricky part of the install. Pick your vehicle and we will show you where it lives and what has to come apart to reach it.

Not sure whether your vehicle even has one? Look for an SOS or Call Toyota button near the rear-view mirror or in the overhead console. No button means no DCM — and no need for the bypass harness.

Short answer

Behind the lower centre dash, at the front of the console.

Hard - the factory procedure involves removing an airbag assembly. Worth handing to a shop unless you are confident.

DCM (Telematics Module) LocationAutoHarnessHouse.com2021-2026 Toyota Sienna (Hybrid)CARGODASHGLOVEBOXCONSOLEshifterDRIVERPASS.FRONT OF VEHICLEVIEW A — looking down1DCMVIEW B — dash from the seatWHERE IT ISBehind the lower centre dash, just right ofthe steering column at the front of thecentre console.HOW TO GET TO ITToyota calls for disconnecting the negativebattery terminal first. Then takes off theboot floor mat, the dash side panel, thelower dash pad, the under-dash cover, thelower dash finish panel. NOTE: thisprocedure involves removing an airbagassembly - disconnect the battery andfollow the airbag precautions in a servicemanual, or have a shop do it.DIFFICULTYHard - the factory procedure involvesremoving an airbag assembly. Worth handingto a shop unless you are confident.No SOS button near the rear-view mirror or overhead console means the vehicle was built withoutSafety Connect - there is no DCM to bypass and this kit is not needed.Schematic drawing, not to scale. Original illustration © AutoHarnessHouse.comautoharnesshouse.com/dcm-location.php?y=2021&m=Toyota%20Siennaautoharnesshouse.com

What it looks like in the car

Photos from vehicles we and our customers have actually had apart.

DCM location photo - Toyota Sienna
The DCM itself, out of the vehicle.
DCM location photo - Toyota Sienna
The bypass connector alongside the factory plug.
DCM location photo - Toyota Sienna
Under-dash view with the lower trim removed.

Where it is

Behind the lower centre dash, just right of the steering column at the front of the centre console.

How to get to it

Toyota calls for disconnecting the negative battery terminal first. Then takes off the boot floor mat, the dash side panel, the lower dash pad, the under-dash cover, the lower dash finish panel. NOTE: this procedure involves removing an airbag assembly - disconnect the battery and follow the airbag precautions in a service manual, or have a shop do it.

No SOS button near the rear-view mirror or overhead console means the vehicle was built without Safety Connect - there is no DCM to bypass and this kit is not needed.

The bypass harness for this vehicle

Our bypass kit disconnects the DCM without losing your front right speaker or the hands-free Bluetooth microphone — the two things that stop working if you simply unplug the module.

See the AHH-DCM77 DCM bypass harness »

Still cannot find it, or your trim looks different? Email us with your year, model, and a photo of your dash and we will point you straight at it.


Vehicles we have mapped so far

We are adding vehicles as we confirm them. Do not see yours? Ask us — that is how this list grows.


Looking for the harness itself? AHH-DCM77 (2020 and newer)AHH-DCM92 (2016-2020).


www.autoharnesshouse.com
inquiry@autoharnesshouse.com

Privacy Policy - Contact Us - Return Policy