Where Is the DCM in a 2018 Toyota Sienna?

The DCM — the Data Communication Module, part of Safety Connect / Connected Services — is the module our bypass harness plugs into. Finding it is the only tricky part of the install. Pick your vehicle and we will show you where it lives and what has to come apart to reach it.

Not sure whether your vehicle even has one? Look for an SOS or Call Toyota button near the rear-view mirror or in the overhead console. No button means no DCM — and no need for the bypass harness.

Short answer

At the far right end of the dash, beside the glovebox.

We have not verified the disassembly for this vehicle yet - ask us before you plan the job.

DCM (Telematics Module) LocationAutoHarnessHouse.com2018-2020 Toyota SiennaCARGODASHGLOVEBOXCONSOLEshifterDRIVERPASS.FRONT OF VEHICLEVIEW A — looking down1DCMVIEW B — dash from the seatWHERE IT ISAt the far passenger end of the dash,behind the lower glovebox - not next to theradio. Take out the lower glovebox and lookup and to the right of the opening: themodule sits up high against the dash framewith its connector facing you (see thephoto below). The DCM label reads Toyotapart number 86741; if the module you arelooking at does not say 86741, it is notthe DCM.HOW TO GET TO ITToyota does not publish a DCM removalprocedure for this van, but you do not needone to find the module: take out the lowerglovebox and the DCM is visible up high atthe right of the opening. Check a servicemanual for your exact model year if youwant the trim steps in print.DIFFICULTYWe have not verified the disassembly forthis vehicle yet - ask us before you planthe job.No SOS button near the rear-view mirror or overhead console means the vehicle was built withoutSafety Connect - there is no DCM to bypass and this kit is not needed.Schematic drawing, not to scale. Original illustration © AutoHarnessHouse.comautoharnesshouse.com/dcm-location.php?y=2018&m=Toyota%20Siennaautoharnesshouse.com

What it looks like in the car

Photos from vehicles we and our customers have actually had apart.

DCM location photo - Toyota Sienna
Lower glovebox removed on a 2018. The DCM is the dark module up high at the right of the opening, tucked behind the dash frame - shown here with its plug already off. The tall cream fuse box to its left is not it.

Where it is

At the far passenger end of the dash, behind the lower glovebox - not next to the radio. Take out the lower glovebox and look up and to the right of the opening: the module sits up high against the dash frame with its connector facing you (see the photo below). The DCM label reads Toyota part number 86741; if the module you are looking at does not say 86741, it is not the DCM.

How to get to it

Toyota does not publish a DCM removal procedure for this van, but you do not need one to find the module: take out the lower glovebox and the DCM is visible up high at the right of the opening. Check a service manual for your exact model year if you want the trim steps in print.

No SOS button near the rear-view mirror or overhead console means the vehicle was built without Safety Connect - there is no DCM to bypass and this kit is not needed.

The bypass harness for this vehicle

Our bypass kit disconnects the DCM without losing your front right speaker or the hands-free Bluetooth microphone — the two things that stop working if you simply unplug the module.

See the AHH-DCM92 DCM bypass harness »

Still cannot find it, or your trim looks different? Email us with your year, model, and a photo of your dash and we will point you straight at it.


Vehicles we have mapped so far

We are adding vehicles as we confirm them. Do not see yours? Ask us — that is how this list grows.


Looking for the harness itself? AHH-DCM77 (2020 and newer)AHH-DCM92 (2016-2020).


www.autoharnesshouse.com
inquiry@autoharnesshouse.com

Privacy Policy - Contact Us - Return Policy