Where Is the DCM in a 2020 Toyota Camry?

The DCM — the Data Communication Module, part of Safety Connect / Connected Services — is the module our bypass harness plugs into. Finding it is the only tricky part of the install. Pick your vehicle and we will show you where it lives and what has to come apart to reach it.

Not sure whether your vehicle even has one? Look for an SOS or Call Toyota button near the rear-view mirror or in the overhead console. No button means no DCM — and no need for the bypass harness.

Short answer

In the centre dash, behind the A/C controls and under the head unit.

Moderate - the radio and the A/C control assembly both come out, along with the meter hood and several finish panels. No airbag work on this

Where it is

In the centre dash, directly behind the A/C / climate controls and below the head unit. Same place as the 2018-2019 and 2021-2024 cars.

How to get to it

The factory procedure takes off the meter hood, the dash garnish, the lower centre dash panel, the lower dash finish panel and the dash air vent, then the A/C control assembly and the radio with its bracket. The module sits behind them with its telephone brackets.

No SOS button near the rear-view mirror or overhead console means the vehicle was built without Safety Connect - there is no DCM to bypass and this kit is not needed.

The bypass harness for this vehicle

Our bypass kit disconnects the DCM without losing your front right speaker or the hands-free Bluetooth microphone — the two things that stop working if you simply unplug the module.

See the AHH-DCM77 DCM bypass harness »

Still cannot find it, or your trim looks different? Email us with your year, model, and a photo of your dash and we will point you straight at it.

Vehicles we have mapped so far

We are adding vehicles as we confirm them. Do not see yours? Ask us — that is how this list grows.

Looking for the harness itself? AHH-DCM77 (2020 and newer) — AHH-DCM92 (2016-2020).