Where Is the DCM in a 2016 Toyota 4Runner?

The DCM — the Data Communication Module, part of Safety Connect / Connected Services — is the module our bypass harness plugs into. Finding it is the only tricky part of the install. Pick your vehicle and we will show you where it lives and what has to come apart to reach it.

Not sure whether your vehicle even has one? Look for an SOS or Call Toyota button near the rear-view mirror or in the overhead console. No button means no DCM — and no need for the bypass harness.

Short answer

Behind the lower centre stack, below the radio/navigation unit.

Hard - the factory procedure involves removing an airbag assembly. Worth handing to a shop unless you are confident.

DCM (Telematics Module) LocationAutoHarnessHouse.com2016-2019 Toyota 4RunnerCARGODASHGLOVEBOXCONSOLEshifterDRIVERPASS.FRONT OF VEHICLEVIEW A — looking down1DCMVIEW B — dash from the seatWHERE IT ISBehind the centre stack, below theradio/navigation receiver and above theshifter - NOT out by the glovebox like the2020+ truck. Its back-up (mayday) batteryis mounted right beside it.HOW TO GET TO ITDisconnect the negative battery terminalfirst. The factory procedure works in fromthe passenger side: the door scuff plate,cowl side trim, cluster finish garnish,under-dash cover, console box insert andthe lower dash panels come off, and thefront passenger KNEE AIRBAG assembly isremoved. The module then unbolts along withits back-up battery and the two telephonebrackets.DIFFICULTYHard - the factory procedure involvesremoving an airbag assembly. Worth handingto a shop unless you are confident.No SOS button near the rear-view mirror or overhead console means the vehicle was built withoutSafety Connect - there is no DCM to bypass and this kit is not needed.Schematic drawing, not to scale. Original illustration © AutoHarnessHouse.comautoharnesshouse.com/dcm-location.php?y=2016&m=Toyota%204Runnerautoharnesshouse.com

Where it is

Behind the centre stack, below the radio/navigation receiver and above the shifter - NOT out by the glovebox like the 2020+ truck. Its back-up (mayday) battery is mounted right beside it.

How to get to it

Disconnect the negative battery terminal first. The factory procedure works in from the passenger side: the door scuff plate, cowl side trim, cluster finish garnish, under-dash cover, console box insert and the lower dash panels come off, and the front passenger KNEE AIRBAG assembly is removed. The module then unbolts along with its back-up battery and the two telephone brackets.

No SOS button near the rear-view mirror or overhead console means the vehicle was built without Safety Connect - there is no DCM to bypass and this kit is not needed.

The bypass harness for this vehicle

Our bypass kit disconnects the DCM without losing your front right speaker or the hands-free Bluetooth microphone — the two things that stop working if you simply unplug the module.

See the AHH-DCM92 DCM bypass harness »

Still cannot find it, or your trim looks different? Email us with your year, model, and a photo of your dash and we will point you straight at it.


Vehicles we have mapped so far

We are adding vehicles as we confirm them. Do not see yours? Ask us — that is how this list grows.


Looking for the harness itself? AHH-DCM77 (2020 and newer)AHH-DCM92 (2016-2020).


www.autoharnesshouse.com
inquiry@autoharnesshouse.com

Privacy Policy - Contact Us - Return Policy