Where Is the DCM in a 2011 Lexus CT200h?

The DCM — the Data Communication Module, part of Safety Connect / Connected Services — is the module our bypass harness plugs into. Finding it is the only tricky part of the install. Pick your vehicle and we will show you where it lives and what has to come apart to reach it.

Not sure whether your vehicle even has one? Look for an SOS or Call Toyota button near the rear-view mirror or in the overhead console. No button means no DCM — and no need for the bypass harness.

Short answer

Behind the centre dash, below the display screen.

Involved - a long trim strip-down ending with the radio out. No airbag work, but set aside an afternoon.

DCM (Telematics Module) LocationAutoHarnessHouse.com2011-2017 Lexus CT200hTRUNKDASHGLOVEBOXCONSOLEshifterDRIVERPASS.FRONT OF VEHICLEVIEW A — looking down1DCMVIEW B — dash from the seatWHERE IT ISIn the centre stack behind the dash, belowthe display - it sits behind the radio /multi-media receiver and comes out afterit.HOW TO GET TO ITThe factory procedure for this generationstrips the right-hand dash side panel, thecluster finish garnish, the lower centredash panel and the console upper panels,then takes out the shift knob, theintegration control panel, the A/C controlassembly and finally the radio (ormulti-media receiver). The module unboltsfrom behind it with its bracket. Disconnectthe negative auxiliary battery terminalfirst - the procedure also empties the reardeck boxes to reach it.DIFFICULTYInvolved - a long trim strip-down endingwith the radio out. No airbag work, but setaside an afternoon.No SOS button near the rear-view mirror or overhead console means the vehicle was built withoutSafety Connect - there is no DCM to bypass and this kit is not needed.Schematic drawing, not to scale. Original illustration © AutoHarnessHouse.comautoharnesshouse.com/dcm-location.php?y=2011&m=Lexus%20CT200hautoharnesshouse.com

Where it is

In the centre stack behind the dash, below the display - it sits behind the radio / multi-media receiver and comes out after it.

How to get to it

The factory procedure for this generation strips the right-hand dash side panel, the cluster finish garnish, the lower centre dash panel and the console upper panels, then takes out the shift knob, the integration control panel, the A/C control assembly and finally the radio (or multi-media receiver). The module unbolts from behind it with its bracket. Disconnect the negative auxiliary battery terminal first - the procedure also empties the rear deck boxes to reach it.

No SOS button near the rear-view mirror or overhead console means the vehicle was built without Safety Connect - there is no DCM to bypass and this kit is not needed.

The bypass harness for this vehicle

Our bypass kit disconnects the DCM without losing your front right speaker or the hands-free Bluetooth microphone — the two things that stop working if you simply unplug the module.

See the AHH-DCM92 DCM bypass harness »

Still cannot find it, or your trim looks different? Email us with your year, model, and a photo of your dash and we will point you straight at it.


Vehicles we have mapped so far

We are adding vehicles as we confirm them. Do not see yours? Ask us — that is how this list grows.


Looking for the harness itself? AHH-DCM77 (2020 and newer)AHH-DCM92 (2016-2020).


www.autoharnesshouse.com
inquiry@autoharnesshouse.com

Privacy Policy - Contact Us - Return Policy