32-pin Wiring Adapter to Retain Rear Camera - Fits Select Nissan Display Audio Radios

Item Number: AHH-7554

This wiring harness retains the factory reverse camera on Nissan vehicles whose factory radio has the camera on the 32-pin connector - mostly the display audio radios (a color screen without navigation) and the non-touch color screens. Navigation radios of the same years usually use the 24-pin adapter, and later touchscreen radios the 40-pin adapter.

Built to order for your vehicle. Nissan used the same white 32-pin connector on several different factory radios, and the camera video, camera power and reverse pins are not in the same positions on all of them. We wire each adapter for the exact vehicle, so please enter your year, model, trim and radio type (navigation or not, screen size, Bose or not) in the buy box. If you order the wrong connector size we will build the correct one for you.

The camera keeps working exactly as it did with the factory radio: the adapter supplies the camera's power, brings the video out on a standard RCA plug for your new head unit, and includes the reverse (camera trigger) lead. Nissan cameras are powered by the factory radio, so do not connect the camera directly to 12 volts.

CAN-H / CAN-L leads (cars with a multi-information display)
On Nissans with a multi-information display (MID) in the instrument cluster, the steering wheel audio buttons are not wired to the radio. They connect to the instrument cluster, which sends each button press to the radio over the vehicle's CAN bus. For these vehicles we add a labeled CAN-H / CAN-L lead pair to this adapter, taken from the factory radio connector.

These two leads are what a steering wheel control interface needs to read your buttons. With the AXXESS AXSWC-2, connect its CAN-H and CAN-L wires to this pair and its other wires to your new head unit as shown in the AXSWC-2 instructions, then let it auto-detect the vehicle. If your new radio learns steering wheel buttons on its own, check that it supports Nissan CAN steering controls - a plain resistive steering-wheel input cannot see these buttons.

We can wire it for you: order the AXXESS AXSWC-2 in the same order as this adapter and we will connect it to the CAN pair and to the main harness and label the remaining head-unit wires, so it plugs straight in at the car.

If your vehicle has no multi-information display, or its steering wheel buttons are wired to the 20-pin radio connector, the CAN pair is not needed and can simply be left insulated.

You can also check your vehicle in our Vehicle Wiring and Compatibility Database. Check out our Wiring Database for vehicle specific information:

Purchase:

Price: $51.00

Vehicle Fitment:

(If a known model is not listed, let us know)

Nissan vehicles with the camera on the 32-pin radio connector
2013-2018 Nissan Altima - display audio (color screen, no navigation)
2013-2016 Nissan Frontier - color screen without navigation; 2018 Frontier - display audio
2015-2017 Nissan Juke - display audio without navigation
2015 Nissan LEAF; 2017 LEAF without navigation; 2018-2020 LEAF with the 5-inch display (not touchscreen)
2017 Nissan Murano - display audio without navigation
2018 Nissan NV1500 / NV2500 / NV3500 - display audio without navigation
2018-2019 Nissan NV200 - display audio without navigation
2015-2017 Nissan Quest
2014-2017 Nissan Rogue - display audio / rear view monitor
2017-2018 Nissan Rogue Sport - display audio without navigation
2015-2018 Nissan Sentra - display audio without navigation
2017-2018 Nissan Titan and Titan XD - display audio without navigation
2015-2016 Nissan Versa and Versa Note - display audio; 2018 Versa and Versa Note - color display without touchscreen

Not sure which radio you have? Send us a photo of the back of the radio or of the connector the camera wire plugs into and we will confirm the fit.