Backup Camera Harness - 24-pin Add-on adapter - Fits Toyota (2014+ Model Year)
Item Number: AHH-7549-2
Add a backup camera to your car or truck! This harness connects a 12-volt Backup Camera to the stock Toyota/Subaru/Scion head unit. The stock head unit is wired with a 6-volt output. This harness uses a 6-volt relay and the 12-volt accessory power provided to the stock head unit to provide a 12-volt output and composite video input for any standard automobile backup camera.
The harness connects in the place of the 24-pin connector pictured here.
You will receive:
-1 Backup Camera Harness(Includes connections for 12-volt jumper harness, 24-pin head unit connection, Composite Video input, Relay, and 12-volt output lead)
-1 12-Volt splice harness(T-harness)
-1 Relay (6-volt input coil)
The harness is 100% plug and play. No splicing the stock wiring harness. Does not disturb stock appearance. The only exception is the Reverse Trigger Wire. Most vehicles have this wire pre-installed. If yours does not, the included pin slides into the stock connector, but the wire other end of the wire must be spliced to a reverse signal(such as the reverse light or the signal wire located in the driver's side kick panel).
Installation:
Installation instructions will be shipped with the harness. In addition, the basics of the installation are depicted here:
Purchase:
Price: $38.00
Vehicle Fitment:
(If a known model is not listed, let us know)
2014+ Toyota Avalon
2014+ Toyota Camry
2014+ Toyota Corolla
2014+ Toyota RAV4
2014+ Toyota Sequoia
2014+ Toyota Tacoma
2014+ Toyota Yaris (Note: 2014-2015 Yaris does not have the reverse trigger wire pre-installed)
2014+ Toyota Venza
2014+ Toyota 4Runner
.jpg)