To select a different vehicle, Enter information here:

Select Year 2024202320222021202020192018201720162015201420132012201120102009200820072006200520042003 Select Model 4RunnerAvalonC-HRCamryCorollaFJ CruiserHighlanderPriusRAV4SequoiaSiennaSolaraTacomaTundraVenza Select Audio System Yes, it has JBL No, it does not have JBL Continue

---

Stereo install adapters - Pioneer, Sony, ATOTO - To fit 2013-2019 Toyota vehicles with JBL audio system)

For 2013-2019 Models WITHOUT JBL, CLICK HERE

If your vehicle has the JBL audio system, there is a specific set of wiring that will be needed when replacing or upgrading the factory audio system. The JBL audio headunit and the stock JBL amp are closely linked, so we must use the AXXESS AXDIS-TY2 module to connect your new equipment to the existing JBL amplifier. Here is an outline of the parts required:

• AXXESS AXDIS-TY2 with Plug and Play Pioneer wiring kit (Includes the Backup Camera, Steering Wheel Control Wiring, and plug and play wiring for the AXXESS AXDIS-TY2
• USB adapter: Retains the USB port in your console and allows it to be connected to the aftermarket headunit.
• AM/FM adapter: Retains OEM AM/FM antenna

AXDIS-TY2 - With Plug and Play wiring kit

The AXDIS-TY2 with Plug and Play Wiring will include everything you need to connect your steering wheel buttons, JBL amplifier, Backup Camera, and power connections to your new radio unit without splicing any wires. The picture above shows wire leads, but when you order from us, we will splice any wiring needed for you so that it will be a fully plug and play adapter, specifically built for the equipment that you plan to install!

Price: $209

USB adapter:

This adapter will retain USB function when you install an aftermarket headunit in your 2010-2015 Toyota (Also fits some 2016 Toyotas)

Price: $17

AM/FM adapter harness:

The AM/FM antenna adapter will retain the AM/FM radio antenna.

Price: $19

---

Installation:

Install the harness
-Verify that the vehicle is off.
-Carefully remove the plastic cover around the head unit and unscrew/unbolt as appropriate. Disconnect and remove the stock headunit.
-Connect the connectors on the AutoHarnessHouse.com harness to the corresponding connectors on the vehicle's wiring harness.
-Connect the red and white RCA connectors to the auxiliary audio input connector on the headunit (if applicable)
-Connect the 3.5mm plug to the "Remote wired input" plug on the back of the unit.

Configure the steering wheel controls (on the headunit screen or using the AXXESS AXDIS-TY2 as appropriate)

Compatibility:

Toyota

4-Runner 2014-2019
Avalon 2013-2018
Camry 2014-2017
Camry (w/nav) 2012-2013
Corolla 2015-2018
Highlander 2014-2019
Prius 3rd Gen. (w/nav) 2012-2016
Rav-4 2014.5-2018
Sequoia 2014-2019
Sequoia (w nav only) 2013
Sienna 2015-2017
Tacoma 2014-2019
Tundra 2014-2019
Venza 2014-2016
Venza (w nav) 2013-2014

Related Products:

Entune 2.0 to Entune 3.0 Transplant Harness