Gear for Subaru Vehicles:


Parts for installing an aftermarket radio in your Subaru:

Install an aftermarket navigation or audio system

Aftermarket Headunit Installation Gear

Upgrade your OEM audio system! Click here to see the wiring that we recommend for installing an aftermarket headunit or navigation system in your Subaru.

These adapters will give you what you need to retain the backup camera and steering wheel controls as well as most other OEM functions.

CLICK HERE FOR MORE INFO


Direct Wire harness for Pioneer

Plug and Play Car Stereo Adapters - The simplest way to install a Pioneer, Sony, or ATOTO headunit in your Subaru!

If you are installing a new headunit in your vehicle, consider one of these models! This wiring harness skips the hassle of soldering between the radio's wiring and the Metra 70-1761. Connect it directly!

Pioneer - Sony - ATOTO

Subaru WRX or Impreza Direct Wire harness for Pioneer

For 2009-2015 Subaru Models:

20-pin ATOTO, Sony, or Pioneer - Direct Wire harness!

If you are installing a Pioneer or ATOTO headunit in your vehicle, this harness skips the hassle of soldering between the headunit wiring and the Metra 70-7552. Connect it directly!

Pioneer - Sony - ATOTO - All Other Models

Direct Wire harness for Pioneer

For pre-2009 Subaru Models, the 14-pin ATOTO or Pioneer Direct Wire harness is now available!

If you are installing an ATOTO or Pioneer stereo headunit in your vehicle, this harness skips the hassle of soldering between the Double-Din wiring dongle and the Metra 70-8901. Connect it directly!

Pioneer - ATOTO - All Other Models

Subaru FRAC harness Camera Harness

Subaru Front View Camera Harness Kit (FRAC Harness)

The Subaru FRAC harness allows you to install a front camera on your vehicle and display the camera image on demand on your vehicle's existing headunit screen. The kit will also allow you to turn on the rear camera on demand. If your car does not have a rear camera or the rear camera does not display on the OEM headunit, an RCA connector is provided to connect an aftermarket camera.

This front camera can be used as a Parking or for forward vehicle monitoring!

CLICK HERE TO CHECK COMPATIBILITY

Parking Brake Bypass Module (plug and play)

Parking Brake Bypass Interface Module for Select Pioneer Headunits

If you are installing a Pioneer headunit in your vehicle and do not have access to the Parking Brake signal (E-brake), then you may choose to bypass the video in motion function on your Pioneer headunit. This model will accomplish this! This unit is plug and play for pre-2009 Subaru Direct wire adapter above.

CLICK HERE TO CHECK COMPATIBILITY


Other parts to fit your Subaru:

MFD Relocation harness

MFD Backup Camera Relocation Harness

Many 2014-2015 Subaru vehicles use the small Multi-function display (MFD) in the dash to display the OEM backup camera. We have developed an adapter to allow our customers to relocate the backup camera image from the MFD to the larger navigation screen.

Important Note: After installation, the backup camera image will no longer display on the MFD. This harness will relocate the image from the MFD to the larger, headunit screen. Your backup camera will now only display on the headunit.

CLICK HERE FOR MORE INFO

Starlink Telemantics Bypass Plug

Subaru Telematics/Starlink Bypass Plug

Are you tired of the Subaru Telematics system acting as big brother? Maybe you've installed a new audio receiver in your car and you removed the telematics unit. Now the front speakers don't work? This adapter will get the front speakers working without the Subaru Telematics unit installed. No more of the Telematics unit tracking your whereabouts or sending you annoying emails about vehicle error messages!

CLICK HERE FOR MORE INFO


Jumper Harness

Aftermarket Amplifier and Subwoofer Installation

Installing an aftermarket amplifier or subwoofer? Pick the correct jumper harness for your vehicle based on the model and configuration of your vehicle HERE!

This prevents the need to cut or damage factory wiring when adding an aftermarket amplifier or subwoofer.

CLICK HERE FOR MORE INFO


2016 Jumper Harness

7" Starlink Headunit installation Harness for 2016+ Subaru vehicles with OEM 6.2" Starlink headunit

This harness is a custom harness built to retain backup camera functionality for customers updating their vehicle from a 6.2" Starlink headunit to a 7" Starlink headunit. The backup camera connectors for these headunits are different so this breakout harness is necessary to retain the functionality of the backup camera.

CLICK HERE FOR MORE INFO


Fujitsu Ten Transplant harness

Subaru Fujitsu-ten Transplant Harness (For 2011-2015 vehicles)

This is an adapter harness that connects to the 20-pin and 16-pin connectors on your vehicle's factory wiring harness. It will provide the necessary electrical connections to install(Transplant) a Fujitsu Ten navigation unit into most newer non-navigation subaru vehicles. Installation is plug and play. Please contact our support team (email to inquiry@autoharnesshouse.com) if you are installing a newer Fujitsu-ten headunit. Newer models are not covered by this page.

CLICK HERE FOR MORE INFO


Add a Backup Camera Harness

Backup Camera Installation Harness

The cheapest and cleanest way to add a backup camera to your car or truck!

This harness connects a 12-volt Backup Camera to the stock Toyota/Subaru/Scion head unit. The stock head unit is wired with a 6-volt output. This harness uses a 6-volt relay and the 12-volt accessory power provided to the stock head unit to provide a 12-volt output and composite video input for any standard automobile backup camera.

CLICK HERE FOR MORE INFO (for Subaru/Scion/Toyota)

**For 2014+ Toyota models, CLICK HERE**


i88/JDM HVAC Install Adapter

Install the JDM A/V Panel (2005-2009 Legacy and Outback

If your Legacy or Outback has automatic climate control (which is integrated into the OEM audio system), replacing the OEM system means relocating the climante controls. The solution to this is to install the JDM A/V panel, which will require Illumination+ and Illumination- signals from the audio wiring harness as well as +12V. Click here to see what wiring you will need to install the JDM A/V Panel. This is known as the i88 installation adapter in some online forums.

CLICK HERE FOR MORE INFO

Shop Pioneer Audio Gear

Additional 28-pin or 16-pin socket pins

28-pin socket

Wired socket pins to fit the 28-pin or 16-pin connector are available. These will fit the stock connector that plugs into the stereo/entertainment system.

CLICK HERE FOR MORE INFO


12-volt power port - Add-a-port harness (Fits: Toyota/Subaru/Scion)

add-a-port

Add a fused "Cigarette Lighter" power port to any Toyota or Scion(also fits some Subaru's).

CLICK HERE FOR MORE INFO

28-pin Head Unit Wiring Harness Adapter (Fits: Toyota/Subaru/Scion)

28-pin

28-pin "jumper-type" harness to fit many Subaru, Toyota, and Scion vehicles. This harness has the female and male connector. One end will connect to the factory harness and the other to the connector on the back of the head-unit or navigation system.

CLICK HERE FOR MORE INFO


12-Volt splice harness (Fits: Toyota/Subaru/Scion)

10-pin toyota connector

Provides a fused(2 amp), switched 12-Volt accessory output. Connects between standard toyota 10-pin radio/head unit connector and the stereo unit.

The harness is 100% plug and play. No splicing the stock wiring harness. Does not disturb stock appearance.

CLICK HERE FOR MORE INFO



www.autoharnesshouse.com
inquiry@autoharnesshouse.com

Privacy Policy - Contact Us - Return Policy